Sprung Dance Floor Full Panel 2 Inch x 3.5 x 3.5 Ft.

1. WaveLock design eliminates soft and hard spots in floor
2. Portable and removable while maintaining floor value
3. Excellent sprung and bounce for dance floors
4. No adhesive required, all screw together components
5. Made in the USA
6. WaveLock technology is the best sprung flooring on the market
7. Take with you when you studio moves

Some light carpentry work is required for installation on these dance floor panels. Please review the Rosco Sprung Floor installation document.

Most users will be able to install the Rosco Sprung Dance Floor on their own. Panels weigh only 44 pounds each. Perimeter pieces are 4-3/8 inches wide, holding the entire floor together. The perimeter of this systems can be connected to concrete or wood floors and can also be removed and re-used in case of a change in venue.

An integral part of the Sprung Floor by ROSCO system is the 4.5 inch diameter closed cell foam pads. These 1 inch thick pads are affixed at specific locations on the underside of each sprung floor panel. This, combined with the Medium Density Fiberboard (MDF) construction of the dance floor panels, utilizing our patented WaveLock technology, yields superb resilience and dimensional stability. Finished vinyl marley dance flooring is required on top of the ROSCO sprung floor panels.

When looking at sprung floors, consider our Rosco sprung floor system. Constructed with a pre built dance floor panel system, these sprung floors are the best available, and will help the health and safety of your dancers.

The Rosco sprung floor system for dance studios or university school classrooms are suitable for the most demanding of professional and students alike. These sprung dance flooring panels by Rosco are made in the USA. The professional dance studio surface will eliminate soft spots in the floor. This sprung floor by Rosco is used nationwide in professional dance studios and traveling dance troupes.

This sprung floor for pro dancers utilizes the WaveLock technology that eliminates soft or hard spots in the dance floor panels at the seams and provides enough flexibility to absorb impact and provide proper bounce. Closed cell foam pads stick to the underside of the sprung dance panels helping to provide superb resilience and dimensional stability. The 42×42 inch dance floor panels nest together seamlessly. This unique design improves performance and increased safety and comfort.

For traveling professional shows, this dance floor panel system is an excellent choice that can be assembled and disassembled as needed repeated with no hard or damage to the sprung floor. Take the sprung floor out if the studios moves locations and reinstall elsewhere in a new location. This floating dance floor panel system installs with customizing panels for a wall-to-wall fit. Nest the pre built sprung floor panels together during installation.

Rosco Custom Sprung Floor Panels

The Rosco customizing sprung floor panel option provide an economical installation for customers that can handle more DIY installation. These DIY sprung dance floor panels offer an option to save on cost and install the finished layer with BCX plywood. Light carpentry is required for wall to wall installation with the customize panels. The Full Panels cannot be cut to fit.

Use the customer floating dance floor panels the sides of studio floor installations to put the finishing touch on a wall-to-wall installation. With these panels, you can customize your floating dance floor around columns and fit irregular shaped rooms.

DIY customizing sprung dance floor panels offer the same spring and bounce as the full panels. Purchase the finished BCX plywood layer locally to complete the install. To save cost consider DIY custom dance floor panels for the entire floating dance floor.

Marley surfaces are sold separately with all sprung floor systems.

Rosco Sprung Dance Floor Component Pieces

Please call customer service to order these accessories.
300 08000 4242 – 42 x 42 inch x 2 inch Panel
300 08010 0042 – 4-3/8 inch x 42 x 2 inch Perimeter
300 08010 0084 – 4-3/8 inch x 7 ft x 2 inch Perimeter
300 08015 0000 – 4-3/8 inch x 21 x 2 inch (x2) Corner
300 08016 0000 – 4-3/8 inch Inside Corner
300 08020 0000 – 21 x 42 inch x 2 inch Ramp
300 08021 0000 – 21 inch Corner Transition Ramp

Shipping

Ships via freight delivery, shrink wrapped on pallets